eVmP1 system
A benchtop eVmP configuration with touchscreen control for pump setup and production use.
View eVmP1
Precision Dispensing Applications
Adhesive and Fluid Dispensing Pumps
Adhesive and fluid dispensing controls a shot or continuous material delivery step in an automated process.
The correct pump configuration depends on the fluid, target volume or flow, nozzle, dispense pattern and the production controls around it. Zaxis published eVmP options include eVmP1, eVmP2 and VS10 configurations.
Request for Quote Request a DemoApplication overview
Viscosity is a selection input, not a stand-alone promise. Review the actual material, temperature, pressure, connection and nozzle requirements with the product documentation and application team.
eVmP2 dual system
A two-pump configuration for applications that need coordinated dispensing paths.
View eVmP2VS10 high-volume option
A servo-driven configuration for published high-volume, demanding dispensing applications.
View VS10Shot dispensing and continuous dispensing
A shot-dispense operation is organized around a defined deposited volume. Continuous dispensing is organized around a steady material delivery requirement. Both still depend on the fluid path, nozzle and motion system, so the pump must be evaluated in the complete station.
Use the published pump range as an initial route. Confirm final performance using the actual material and production setup.
Handling adhesives, lubricants and sealants
Adhesives, lubricants and sealants can impose different handling conditions. The selection review should capture the material, expected viscosity behavior, desired delivery rate, backpressure and cleaning or changeover needs.
A valveless positive-displacement pump uses a ceramic piston path without external check valves. It does not remove the need to verify chemical compatibility and the entire wetted path.
Controls for an automated dispensing station
The eVmP family supports electronic adjustment. Published configurations also describe stored programs and automation connections; confirm the interface and capability for the selected product.
Define the machine trigger, dispense command, alarms, recipe changes and evidence required by the process. This keeps pump selection connected to the equipment architecture rather than separated from it.
Relevant Zaxis metering pumps
Use the metering pump comparison to begin a range and configuration discussion.
Frequently asked questions
What is the difference between shot and continuous dispensing?
Shot dispensing targets a defined deposited volume; continuous dispensing targets ongoing delivery. The complete station determines the outcome.
Can a pump be selected by viscosity alone?
No. Review the material, temperature, flow or volume, pressure, nozzle, wetted path and production controls together.
Which Zaxis configurations route to adhesive dispensing?
eVmP1, eVmP2 and VS10 published configurations are useful starting points for an application review.
How are automation controls selected?
Define the required commands, recipe behavior and interface with Zaxis for the chosen configuration.
Does a valveless design eliminate compatibility review?
No. Verify the actual material against the selected wetted materials and full fluid path.
Discuss your dispensing application
Share the fluid, volume, flow, wetted-path and automation requirements with Zaxis.
Request for Quote
