VS10-Series milliliter metering pump with molded pump head on a chemistry lab bench

Front view of the VS10-Series milliliter metering pump with molded pump head

High-Capacity eVmP Pump

VS10-Series High-Volume Valveless Metering Pump

Servo-driven milliliter dispensing for high-flow production applications

The VS10-Series is a Zaxis eVmP valveless metering pump for milliliter-scale dispensing and continuous metering. Its V6SAN-W milliliter head combines a large fill volume with a valve-less piston design, while the VMP-OEM-VS10 servo-driven drive supplies the speed and control needed for demanding high-flow dispensing applications.

The VS10-Series dispenses 6 L/min at 600 RPM and can dispense nearly 10 mL per stroke. The V6SAN-W head is paired with the VMP-OEM-VS10 drive, which operates at up to 600 RPM depending on viscosity. This combination suits applications that require substantial volume per cycle without moving away from controlled positive-displacement metering.

Fluid-contact materials for the V6SAN-W include medical-grade alumina-oxide ceramic and 316 stainless steel, with customization available. The pump head also uses 316 stainless steel and PTFE wetted parts and can be supplied with tri-clamp or sanitary fittings, optional wash glands, and numerous fitting configurations for application-specific fluid paths.

The VMP-OEM-VS10 supports continuous metering, single or multiple dispense, flow dispense, flow direction and suck-back operating types. It stores up to 50 programs and provides RS485 in half- or full-duplex modes with optional EtherNet/IP. Zaxis has made electronic metering pumps for more than 25 years for automation production lines that require repeatable fluid handling.

Request for Quote

Dispense Rate Calculator

Dispense volume per stroke µLStrokes per minute spmTarget volume mLFlow rate mL/minTime to dispense target s

Why Choose the VS10-Series for High-Volume Dispensing?

The VS10-Series brings a large-displacement milliliter pump head and a specialty servo drive together for applications where output volume, speed and controlled operation all matter. The V6SAN-W head offers one of the largest fill volumes per stroke and metering rates in the Zaxis milliliter range, while the VMP-OEM-VS10 accepts the head as a complete pump system.

A valve-less piston design avoids external supply and discharge valves. The V6SAN-W uses ceramic, 316 stainless steel and PTFE in its wetted path, and its optional sanitary details help configure a fluid path for the process at hand. The head is rated for -20˚C to 70˚C, non-condensing operation, supporting a broad operating environment across configured production setups. On the drive side, the servo platform makes it possible to select continuous, dispense and flow-oriented operating modes from one controller.

Front and side views of the VS10-Series milliliter metering pump

10 mL
Per Stroke

Large-displacement milliliter dispensing.

6 L/min at 600 RPM
Flow Capacity

High-flow output for continuous metering.

±1% FS
Accuracy

Specified full-scale accuracy for the milliliter head.

0.5% FS CV
Repeatability

Specified coefficient of variation for the milliliter head.

Up to 50
Stored Programs

Saved operating programs in the VS10 drive.

VS10-Series milliliter metering pump with servo drive and molded pump head

VS10-Series Metering Pump Benefits

The VS10-Series is built around a milliliter head and servo-driven system intended for high-capacity liquid handling. Its material options, configurable fittings, stored programs and industrial communications provide a practical foundation for integrating precise positive-displacement pumping into a production process.

✓Large fill volume per stroke and high metering rate.
✓Valve-less piston design for milliliter metering and dispensing.
✓Medical-grade alumina-oxide ceramic, 316 stainless steel and PTFE wetted-path materials.
✓Tri-clamp and sanitary-fitting options designed to meet FDA and 3A standards.
✓Optional wash glands and numerous fitting configurations.
✓Servo-driven VMP-OEM-VS10 drive accepts the V6SAN-W pump head.
✓Continuous metering, single or multiple dispense, flow dispense, flow direction and suck-back modes.
✓Up to 50 stored programs.
✓RS485 and optional EtherNet/IP interface options.

How the VS10-Series Metering Pump Dispenses

The eVmP family uses a rotating and reciprocating valve-less ceramic piston. Its fluid cycle relies on the piston rather than external supply and discharge valves, giving the pump a compact positive-displacement path for repeated liquid handling.

Aspirate

The piston draws fluid into the pump head through the available inlet path.

Rotate and Seal

The piston rotates to seal the inlet as the valveless ceramic-piston mechanism changes position.

Dispense

The piston moves to deliver the metered liquid through the discharge path.

Repeat

The drive repeats the programmed cycle for continuous metering, single or multiple dispense, flow dispense, flow direction or suck-back operation.

For an overview of Zaxis variable metering pump operation and controls, visit the VMP video tutorial in the resources below.

Where the VS10-Series Is Applied

The VS10-Series combines milliliter-scale displacement with programmable servo control for applications that need repeatable liquid handling at larger output volumes. Zaxis resources describe uses across diagnostic reagents, buffer dispensing, pharmaceutical work, chemical processes, OEM instruments and electronics fluid metering.

Diagnostic reagent dispensing

Meter controlled volumes for diagnostic reagent workflows where repeatability supports consistent processing.

Buffer dispensing

Configure programmed dispensing for buffer-handling workflows and automated liquid preparation.

Pharmaceutical manufacturing

Support fluid-metering applications in pharmaceutical manufacturing with a configured positive-displacement pump.

Chemical metering

Use continuous metering or flow-dispense operating types for controlled chemical fluid handling.

Analytical instruments and OEM equipment

Integrate a servo-driven pump system with RS485 or optional EtherNet/IP where a machine requires controlled liquid movement.

Electronics fluid metering

Apply programmable pumping to electronics-manufacturing fluid-metering processes.

Technical Specifications

These specifications describe the V6SAN-W milliliter head and VMP-OEM-VS10 drive used in the VS10-Series configuration. Flow, speed and pressure capability depend on the configured pump and the liquid viscosity; contact Zaxis to match a head, fittings and control interface to the application.

Front of the VS10-Series milliliter metering pump with molded pump head

Milliliter Head — Compatible Drive: VMP-OEM-VS10
Milliliter Head — Wetted Path: Ceramic (medical grade alumina-oxide), 316SS, Customization available
Milliliter Head — Operational Temps: -20˚C – 70˚C, non-condensing
Milliliter Head — Accuracy & Repeatability: +/- 1% Full Scale Accuracy, 0.5% Full Scale CV (coefficient of variation)
Milliliter Drive — Dimensions: 3.6″ wide, 4.9″ high, 9.3″ deep
Milliliter Drive — Compatible Heads: V6SAN-W
Milliliter Drive — Weight: 18.4lbs (with pump head)
Milliliter Drive — System Power: 24VDC 4Amp (Optional 75VDC 5Amp)
Milliliter Drive — Pressure Range: 100PSIG Max
Milliliter Drive — RPM: 600 (speed dependent on viscosity)
Milliliter Drive — Operational Types: Continuous Metering, Single/Multiple Dispense, Flow Dispense, Flow Direction & Suck Back
Milliliter Drive — Stored Programs: Up to 50
Milliliter Drive — Interface: RS485, 1/2 or Full Duplex, Optional EtherNet/IP

Download Full Specifications

Compare the
eVmP Range

The eVmP family covers several dispensing ranges and configurations. Choose the VS10-Series when a milliliter application benefits from a V6SAN-W head, servo-driven control, nearly 10 mL per stroke and 6 L/min at 600 RPM capacity. The M Series addresses microliter dispensing, while the V Series is another milliliter valveless metering option; enclosure models package eVmP pumps for benchtop or dual-pump applications.

Comparison source: Specifications from the Zaxis eVmP product pages. The installed pump head and drive set the working range; confirm the configuration with Zaxis.
Specification	M-Series	V-Series	VS10-Series	eVmP1 Benchtop	eVmP2 Dual
Format	Pump head + OEM drive	Pump head + OEM drive	Pump head + servo drive	Benchtop enclosure, 7″ touchscreen	Dual enclosure, two pumps
Volume per revolution / stroke	2.5–100 µL	25 µL–1.28 mL	10 mL per stroke	Up to 1.28 mL (installed head)	Up to 1.28 mL (installed heads)
Maximum flow	Under 100 mL/min	Up to 1,920 mL/min (VS drive)	6 L/min at 600 RPM	Up to 900 mL/min	Up to 1,920 mL/min (VS-Series)
Maximum pressure	100 PSIG	100 PSIG (V) / 200 PSIG (VS)	100 PSIG	0–100 psi	100 PSIG (M/V) / 200 PSIG (VS)
Accuracy / repeatability	±1% FS / 0.5% CV	±1% FS / 0.5% CV	±1% FS / 0.5% CV	±1% FS / 0.5% CV	±1% FS / 0.5% CV
Wetted path	Ceramic, PVDF (Kynar®), PTFE, Rulon® AR	Ceramic, 316SS	Ceramic, 316SS, PTFE; sanitary fittings	Ceramic, 316SS, 303/304SS, PVDF, PEEK	Ceramic, 316SS, 303/304SS, PVDF, PEEK
Drive	Stepper (VMP-OEM-M)	Stepper (VMP-OEM-V) or servo (VMP-OEM-VS)	Servo (VMP-OEM-VS10)	M/V stepper or servo drive	Two stepper drives
Interface	RS485, PLC I/O, optional EtherNet/IP	RS485, PLC I/O, optional EtherNet/IP	RS485, PLC I/O, optional EtherNet/IP	RS485, 24 VDC I/O, optional EtherNet/IP	Ethernet TCP/IP, RS485
Stored programs	Up to 50	Up to 50	Up to 50	Up to 50 per drive	Up to 50

Industries We Serve

Zaxis electronic valveless metering pumps serve automation production lines that handle liquids, chemicals and other substances. The VS10-Series offers a high-capacity milliliter configuration for teams that need repeatable fluid displacement alongside configurable fittings, program storage and industrial communications.